5 speed punto gearbox
3-4 Hub Removal
- With the circlip removed place the shaft back on the splitter
- It needs to be positioned so that it sits on the bottom of third gear
- Push the shaft through with the press
- It will also remove 3rd gear & hub at the same time
- On the bench carefully de-spring the hub push the inner out
- Retain all the (3) springs & (3) rollers or the 3 shift plates ( detents)
- Inspect the hub for wear if worn it will need changing *3rd & 4th issues are really common
- You will also need to clean out all the swarf from both parts of the hub* dull silver almost paste like
- Use a degreaser or paraffin, brake cleaner and a small wire brush
- Once the 3-4 hub & 3rd gear is removed you are ready for the final stage
Recent Posts